BB5 CONATCT SERVIVCE,TRUN OFF PROBLEM,IMEI REPAING SIMPLE GUIDE

NOKIA SOFTWARE MASTER :stanner_austin" ALLREADY POSTED GOOD SOLUTION AND CHCEKING METHODE BUT MANY

NOKIA TECHNICIANS DONT UNDERSTAND HOW TO CHECK AND HOW SOLVED THIS PROBLEM
SEE MY TECHNICS
CONNECT JAF
1)SELECT BB5 TAB
2)MARKED SELF TEST OPTION
3)USE SERVICE BUTT




REGARDS

 >>> BB5 - Contact Retailer PERFECT Solution <<<
01 - FIRST DO THIS  BB5 Certificate Backup Tutorial For JAF users - " BACKUP "
             *********How to backup bb5 NPC********

                       Way #1 (will display more info after)
-----------------------
                               Untick: use INI
                              tick: CRT 308
                              tick: CRT BKP
                         DO NOT SELECT ANY MCU / PPM
                              Now click FLASH
                             Way #2
-----------
                  Click CRT Tool > Backup CRT
So, in any case if you got things like this on the phones that you already backed up.......
This way how to restore it:
Now click CRT Tool
----------------------
> Operation: Write RPL , Tick Plain RPL
> Select RPL (you saved it in your folder, remember?)
** in this case, located on ex.. C:\Program Files\ODEON\JAF\ProgData\3522781710628_CRT_backup_ 410173.rpl
> Write RPL
> Close
Now phone should be "Phone start up failed, Contact Retailer"
** You will need to restore your original CRT PM, in this case is located on
C:\Program Files\ODEON\JAF\ProgData\352278010710628_CRT_backu p_47173.pm
Next operation : Write PM > Service

Last Operation: write full pm.
-------------------------------
You will need SX4 server for this operation.
Tick SX4 AUTH > Service
And Then... > Tick Write PM > click Service
Now select your good PM
Ensure your self  : > INF

02 - ERASE ( BB5Erase_8MBrap )

03 - ERASE ( BB5Erase_16MBrap )

04 - ERASE ( BB5Erase_32MBrap )

05 - LAST DO THIS BB5 Certificate Backup Tutorial For JAF users - " RESTORE "
sama seperti di atas.
 *********How to backup bb5 NPC********

                       Way #1 (will display more info after)
-----------------------
                               Untick: use INI
                              tick: CRT 308
                              tick: CRT BKP
                         DO NOT SELECT ANY MCU / PPM
                              Now click FLASH
                             Way #2
-----------
                  Click CRT Tool > Backup CRT
So, in any case if you got things like this on the phones that you already backed up.......
This way how to restore it:
Now click CRT Tool
----------------------
> Operation: Write RPL , Tick Plain RPL
> Select RPL (you saved it in your folder, remember?)
** in this case, located on ex.. C:\Program Files\ODEON\JAF\ProgData\3522781710628_CRT_backup_ 410173.rpl
> Write RPL
> Close
Now phone should be "Phone start up failed, Contact Retailer"
** You will need to restore your original CRT PM, in this case is located on
C:\Program Files\ODEON\JAF\ProgData\352278010710628_CRT_backu p_47173.pm
Next operation : Write PM > Service

Last Operation: write full pm.
-------------------------------
You will need SX4 server for this operation.
Tick SX4 AUTH > Service
And Then... > Tick Write PM > click Service
Now select your good PM
Ensure your self  : > INF
100% TRIED, TESTED & PROVEN 100% WORKING - 6630, 6680, N90 & N70

here's the ERASE FILES

RAPIDSHARE
You are not allowed to view links.
Register or Login

MEGAUPLOAD

You are not allowed to view links.
Register or Login


Best Regards
Thank you Odeon Team for Ultimate Solution